How to Select a Pump for an Installation
Correct pump selection starts from the installation's operating point, not just the nozzle diameter or motor power.
Data Required for Selection
- type, temperature, and cleanliness of the pumped medium,
- required flow rate,
- head height including installation losses,
- suction height, if applicable,
- diameters, lengths, and materials of pipes,
- available power supply,
- mode of operation: continuous, periodic, or automatic,
- ambient conditions and installation site.
Flow Rate and Head Height
Pump parameters should be read from the characteristic curve for the common operating point. Maximum flow rate and maximum head height usually occur at different points on the curve and are not achieved simultaneously.
Surface Pump or Submersible Pump?
The decision depends, among other things, on the water level, source depth, feasibility of a sealed suction line, and required flow rate. Under difficult suction conditions, a unit operating below the water surface may be the appropriate solution.
Do Not Ignore Installation Data
Oversizing can also be a problem: it increases costs, noise, and cycle count, and in some installations worsens operating conditions.